10-4 Collapsing Can Description



Download 5.26 Kb.
Date23.11.2017
Size5.26 Kb.
#37736
10-4

Collapsing Can
Description: Water is added to an empty soda-pop can and heated to boiling. Can is then quickly inverted into cold water which causes it to collapse. Or a larger gas can is used and instead of being inverted into the water after heating the water inside, the can is stoppered and then allowed to cool in water or in room temperature air.
Concept: When water vapor inside the can is cooled it condenses, decreasing the pressure on the inside of the can. With the atmospheric pressure on the outside of the can greater than that on the inside, the can will collapse.
Materials:


Procedure:

Put a small amount of water in can and heat over Bunsen burner. When water is boiling and water vapor escapes the can, quickly invert can into pan of cold water.


Gas Can Option: Use a rubber stopper to plug hole in 1 gallon gas can (available at the BigFoot-Amoco station on 3rd and Indiana Ave.). Just remove from heat, stopper, and let sit at room temperature.
Clean-up: Recycle aluminum can.
Notes: Shakhashiri says that a steel or partially steel can is more likely to suck water up instead of collapsing.
Done in C101 and C105

10-4


Download 5.26 Kb.

Share with your friends:




The database is protected by copyright ©sckool.org 2022
send message

    Main page